Performing a Health Status Check in the Wrench app

1. Open the Wrench App.
2. Tap on the name of the pump you want to inspect.
3. You’ll be taken to a screen showing eight key status indicators that provide a quick snapshot of the pump’s condition.
4. At the top right of the screen, check the HOA (Hand-Off-Auto) indicator.
   • This shows the current control mode the pump is set to.
5. Review the following indicators:
   • Bluetooth Connection (middle of screen):
     • 🟢 Green = Connected to the Wrench App
     • 🔴 Red = Not connected
   • BMS Icon (right side):
     • 🟢 Green = Connected to the Building Automation System
     • 🔴 Red = No connection
   • Firmware Icon (left side):
     • 🟢 Green = Latest firmware installed
     • 🔴 Red = Firmware is outdated
   • Connectivity Icon (right side):
     • 🟢 Green = Actively transmitting data to Envelope Core
     • 🔴 Red = Connectivity is interrupted
6. Near the bottom of the screen, you’ll see Performance status.
   • Tap “Performance” to view any performance-related issues.
7. At the very bottom, you’ll find a list of any flagged pump issues.
   • Tap to view full issue details on the next screen.